Working principle of centrifugal oil purifier manufacturer
The manufacturer of the centrifugal oil purifier must fully understand its working principle when designing it, so that it can understand the product more comprehensively. Therefore, it can quickly avoid many problems in the subsequent manufacturing. Then for it How much do you know about how it works? May wish to take this opportunity to read it together, hope it will be helpful to us.
The working principle of the centrifugal oil purifier is very simple and the effect is remarkable. Inside it, there is a rotor with a double-jet nozzle, which only needs oil to generate pressure to provide driving force for it. After the equipment is turned on, the oil in the oil tank is sent to the rotor through the pump, and when the oil is filled with the rotor, it is sprayed along the fuel injection nozzle at the lower part of the turntable, thereby generating driving force to make the rotor fly at a high speed. Due to the principle of centrifugal force, the centrifugal oil purifier can directly drive impurities to separate from the oil. The separated impurities are attached to the impurity collection cover in the rotor, and only need to be cleaned regularly. In addition, because the specific gravity of water is greater than that of oil, under the action of centrifugal force, the water is separated from the oil and stored in the inner oil pan of the rotor, which only needs to be removed during cleaning. The filtered oil flows directly back into the tank by gravity.
Our manufacturer of centrifugal oil purifiers specially emphasized that the centrifugal oil purifier can remove the degraded oil molecules, so that the insulating oil is highly purified and the insulation performance is improved. Therefore, when we make use of it, we must make full and reasonable use of its advantages.