Your location:Home   News  company news

The difference and application of gas filter and liquid filter

 2020-12-09 | View:567

Filtering equipment refers to mechanical equipment or devices used for filtering, and is a common equipment commonly used in industrial production. However, there are many types of filtering equipment, and different types of equipment are suitable for different filtering environments and filtering efficiencies. Below, Viking will introduce you to the difference and application of gas filters and liquid filters.
The liquid filter is an indispensable device on the pipeline of the conveying medium. It is usually installed at the inlet of pressure reducing valve, pressure relief valve, fixed water level valve or other equipment to filter impurities in the material to protect the normal use of valves and equipment. When the fluid enters the filter element through the liquid filter, its impurities are blocked, and the clean filtrate is discharged from the filter outlet. When you need to clean, you only need to take out the detachable filter element, and then reinstall it after treatment. The liquid filter is easy to use and maintain.
The gas filter is mainly composed of a filter element and a shell. The basic requirements are high filtration efficiency, low flow resistance and long-term continuous use to reduce the cost of subsequent consumables. The filter element refers to the air filter, which plays a vital role in the air purification industry. It is mainly used to capture particle dust and various suspended solids below 0.5um. Use ultra-fine glass fiber paper as the filter material, offset paper, aluminum film and other materials as the partition, bonded with the wooden frame aluminum alloy, made of special silicone rubber, odorless, the surface will not harden, will it take a long time Continuous cracks, stable chemical properties, corrosion resistance, can absorb the stress generated by thermal expansion and contraction without cracking, moderate hardness, and good elastic recovery. Each unit has been tested by the sodium flame method and has the characteristics of high filtration efficiency, low resistance and large dust holding capacity.