The development of pipeline filters in my country is still very fast and can be applied to many industries, such as the chemical industry, metal manufacturing and food processing. These industries will more or less communicate with anti-corrosion. The emergence of pipe filters helped these companies solve the problem. In order to solve the corresponding problems, how to better use the pipe filter? Below, the pipeline filter manufacturer Viking will introduce to you.
1. Frequently check whether the connecting pipe of the pipeline filter is firm, whether it is leaking or damaged.
2. Do not open the cover of the pipe filter under pressure, otherwise the remaining liquid may spray out and cause liquid loss and personal injury.
3. Check whether the inlet valve and outlet valve of the pipeline filter are tightly closed. Check the pressure gauge to ensure that the internal pressure is 0. At this time, the pipeline filter should be separated from the pipeline system. Open the drain valve and wait until the remaining liquid in the pipe filter is drained through the drain valve before opening the cover.
4. Open the upper cover of the pipe filter correctly, loosen the upper cover, lift the upper cover, and then rotate it to a certain angle. 5. Check the O-ring and O-shaped groove on the filter: If the O-ring is deformed, scratched or broken, or there is a problem with the joint of the O-ring, please replace it with new parts. Pay attention to these issues when using pipe filters, so that you can better improve product quality.