Now, no matter what we do, we emphasize recycling and environmental protection. On the issue of water, in order to achieve the purpose of recycling, the circulating filter has become a good choice. We can refer to some working principles and characteristics of the loop filter.
Principle: After the water enters from the water inlet, the coarse filter will filter out relatively large impurity particles, and then enter the fine filter to filter out relatively small dirt. Impurities usually accumulate inside the fine filter, creating a pressure difference between the inside and outside of the fine filter.
After installing the circulating filter, you need to ask professional technicians to debug and set the time for filter box cleaning and conversion. When the pressure difference reaches the preset value, it will automatically clean up. At this time, the water purification process will not be interrupted, the cleaning valve will open, and the water pressure in the cleaning chamber and the dirt suction device will drop significantly, so that the filter cartridge will pass through the pressure difference between the suction pipe and the suction device. The suction nozzle generates suction between the suction pipe and the clean room to form a vacuuming process.
The combination of the axial movement and the rotary movement of the dust suction device completely cleans the entire inner surface of the filter. When the filter starts to work, after the preset cleaning time is reached, the electric air feed water control valve drives the motor signal to trigger the following actions: the motor drives the brush to rotate to clean the filter element, and then the control valve opens to discharge sewage . The entire cleaning process only lasts for tens of seconds. After the cleaning work is over, the system will be restored to its original state. No matter how complicated this process is, the time is very short, only about 10 seconds.
Features: The circulating filter has many features. For example, it has a wide range of uses and can be used in many water treatment sites to meet the needs of various working environments. Due to the use of high-quality anti-corrosion and wear-resistant materials, and the relatively advanced design process, the filter screen can be used for a long time without maintenance. From an operational point of view, it is very simple and does not require manual and repeated washing.